Universal Engraving And Copy Milling Machine

Universal Engraving And Copy Milling Machines

Model TP-85

A swivel-mounted control panel (1) provisos maximum handling ease, enabling the operator to work in a sitting position. The worktable (2) is adjustable in three axes to handwheel scales while the copyholder table (3) can be adjustable in two axes and additionally rotated to scale (4). The clamping levers (5) for both tables are located at a conveniently accessible point on the column. The pulley bracket (6) is designed as a sturdy belt guard for maximum operator safety.

Areas covered by pantograph
Pantograph ratio	Rectangle mm	Square mm	Ellipse mm	Circle mm
1:1.5	165x335	174	176x450	176
1:2.0	122x255	162	180x320	200
1:3.0	80x173	107	115x230	138
1:4.0	62x125	81	92x155	104
1:6.0	37x87	52	57x110	67
1:8.0	26x63	37	42x76	47
1:10.0	15x50	24	25x65	25

The control panel can rotate left and right and have a very simple usage. The lighting system, mounted on this panel, provides maximum lighting where required. The worktable is adjustable in three axes and also copyholder table can rotate to any scale. The driver motor is pole-changing, so that can provides a number of speed-steps.

Technical data
Drive Motor power Speed (pole changing)	0.5-0.6 kW
Drive Motor power Speed (pole changing)	1400-2800 rpm
Cutter Spindle Collect capacity Vertical adjustment of spindle Fine Coarse Speed 1st speed 2nd speed	4-6-8 mm
	2 mm
	6 mm
	475 ... 9500 rpm
	3150 ... 20.000 rpm
Copying ratios Max. ratio Min. Ratio	1:15
Copying ratios Max. ratio Min. Ratio	1:10
Worktable Clamping surface Max. distance between spindle and worktable Longitudinal movement Transverse movement Vertical sensitivity Horizontal sensitivity Max. weight of work	210x360 mm
	390 mm
	160 mm
	300 mm
	0.01 mm
	0.02 mm
	250 kg
Copyholder Table Clamping surface Max. distance between tracehead and table surface Vertical sensitivity Horizontal sensitivity Table swivel range	340x520 mm
	290 mm
	0.01 mm
	0.02 mm
	360 º
Special Attachments	1/90 Index head
	Angular Table
	Letter Templates
Floor space	600x520 mm
Height of machine	1750 mm
Weight of machine	600 kg

Universal Surface Engraving Machines

Model TP-92

Areas covered by Machine
Copying ratio	Rectangle mm	Circle mm
1:1	380	528x275
1:2	250	310x200
1:4	150	209x95
1:8	83	82x60
1:20	35	28x31
1:50	13	13x10

TP-92 Universal Surface Engraving Machine has the largest areas of covered capacity in the same types. Verifier adjustment offered the linear scales accurately set on intermediate ratio. Especially 1/1 copying problems will be solved without any great investment. Machine can also be used partly in three dimensions. Fine vertical fed adjustment is graduated to 0.01 mm. Machine has great advantage for two dimensional engraving like contour milling, drilling for especially for plastic injection mould, steel punch, cams, die casting mould, shoes mould, name plate, control panel etc.

Technical Data
Drive Motor Power Speed (pole changing)	0.3-0.43 kW
Drive Motor Power Speed (pole changing)	1400-2800 rpm
Cutter spindle Collect capacity Vertical adjustment of spindle Coarse Speed 1 st seed 2 nd speed	4-6-8 mm
	2 mm
	6 mm
	475 ... 9500 rpm
	3150 ... 20.000 rpm
Copying ratios Max. ratio Min. ratio	1:1
Copying ratios Max. ratio Min. ratio	1:100
Worktable Clamping surface Max. distance between spindle and worktable Vertical sensitivity Horizontal sensitivity Max. weight of work	500x300 mm
	390 mm
	0.01 mm
	0.02 mm
	250 kg
Copyholder Table Clamping surface Max. distance between tracerhead and table surface Table swivel range	400x500 mm
	100 mm
	360º
Floor space	650x470 mm
Height of machine	1400 mm
Weight of machine	300 kg