Plastic Pipe Production Lines

The Line includes
1. Extruder 1.1. Twin Screw Extruder         Model MCV 90 x 20 D         Model MCV 67 x 17 D        Model MCV 67 x 20 D       Model MCV 50 x 20 D 1.2. Single Screw Extruder        Model MTV 90 x 25 D        Model MTV 70 x 25 D        Model MTV 60 x 25 D        Model MTV 50 x 25 D        Model MTV 60 x 28 D	2. Pipe Bath 2.1. With Vacuum         Model MVBH 250-6000        Model MVBH 315/6000 2.2. With Sprey        Model MSH 250/6000        Model MSH 315/6000 3. Pipe Hall-Off Unit     Model MCC 250/1200 4. Shaved Pipe Saw     Model MTT 160     Model MTT 250 5. Pipe Heads

Double Screw Extruder

Technical Data		MCV 90 x 20 D	MCV 67 x 17 D	MCV 67 x 20 D	MCV 50 x 20 D
Drill Diameter	mm	? 90	? 67	? 67	? 50
Drill Length	mm	20 D	17 D	20 D	20 D
Maximum Back Pressure	kN	350	255	255	200
Main Engine Power	kW	DC 55	DC 37.5	DC 37.5	AC 11
Reducer Rate		1/28.5	1/27.5	1/27	1/20
Max. Drill Revolution	rev/min	4-40	4-40	50	4-40
Cylinder Rezistances	pieces	5	4	5	4
Cylinder Rezistance Power	kW	21	15	18	15
Cylinder Cooling System		OIL	AIR	OIL	AIR
Head Rezistance Number	pieces	3	2	3	2
Head Rezistance Power	kW	30	20	20	15
Dosage Engine Power	kW	1.5	0.75	0.75	0.55
Dosage Reduce Rate		1/53	1/53	1/53	1/53
Vacuum Pump Power	kW	2.2	1.5	1.5	1.5
Adm.Power of Vacuum Pump	Nm3/strock	25	16	16	16
Installed Electric Power	kW	110	63	63	50
Capacity of Pipe (max)	kg/h	250	100	140	75
Capacity of Profile (max)	kg/h	150	80	100	50
Working Axis	mm	1020	1020	1020	1020

Measurements MCV 90x20D MCV 67x17D MCV 67x20D MCV 67x20D A mm 3900 3160 3360 2700 B mm 1000 900 900 955 C mm 2500 2300 2300 2000

Single Screw Extruder

Technical Datas		MTV 90x25D	MTV 70x25D	MTV 60x25D	MTV 50x25D	MTV 60x28D
Drill Diameter	mm	? 90	? 70	? 60	? 50	? 60
Drill Length	m	25 D	25 D	25 D	25 D	28 D
Maximum Back Pressure	kN	300	200	200	200	300
Power of Main Engine	kW	37.5	22	22	22	80
Reducer Rate		1/28.5	1/27	1/27	1/27	1/8.7
Max. Drill Revolution	rev./min.	40	40	40	40	135
Cylinder Rezistance Number	pieces	6	5	4	3	4
Cylinder Rezistance Power	kW	15	12	10	8	16
Cylinder Cooling System		AIR	AIR	AIR	AIR	AIR
Head Rezistance Number	pieces	4	4	4	3	7
Installed Eelectric Power	kW	60	43	40	35	110
Average Capacity	kg/h	Depends on raw amterial and product. Average for PE and PPH 150 kg/h
Working Axis	mm	1020	1020	1020	1020	1020

Measurements MTV 90x25D MTV 70x25D MTV 60x25D MTV 50x25D MTV 60x28D A mm 3200 2650 2400 2150 3520 B mm 1000 900 900 900 860 C mm 2200 2000 2000 2000 2000

Cooling Bath with Vacuum & Sprey

Technical Datas		MVBH		MSH
		250/6000	315/6000	250/6000	315/6000
Measures of Extrusion Material	mm	O20-250	O110-315	O20-250	O110-315
Power of Circulation Pump	kW	5.5	7.5	5.5	7.5
Power of Vacuum Pump	kW	4	5.5	-	-
Forward & Bacward Adjustment Power	kW	0.55	1	0.55	1
Installed Electric Power	kW	10	14	6	8.5
Suction Capacity of vacuum Pump	m/h	63	10	-	-
Heat of Circulation Water	oC	15	15	15	15
Average Water Pressure	t/h	25	25	25	25
Fountain Numbers	pieces	140	160	140	160
Quantity of Used Water	m3/h	5	7	5	7
Measurement of Water Outlet&Inlet	inc	2	2	2	2
Water Pressure	mss	25	25	25	25
Forw.&Backw.Adjust.Qualifled	mm	700	700	700	700
Working Axis	mm	1020	1020	1020	1020

Measurements MVBH MSH 250/6000 315/6000 250/6000 315/6000 A mm 6440 6440 6440 6440 B mm 800 950 800 950 C mm 1350 1500 1350 1500

Pipe Haul-Off Unit

Technical Datas		MCC 250x1200
Measures of Hall-Off Pipe	mm	O 20-250
Contact Length	mm	1200
Contact Width	mm	190
Palette Number	pieces	120
Engine Power	kW	1.5x2
Engine Revolution	rev./min.	1500
Reducer Rate		1/47.4
Speed of Hall-Off Unit	min	0.2-7.5
Power of Engine Driver	kW	3
Power of Hall-Off Unit	N	10 000
Working Axis	mm	950-1100

Measurements MCC 250/1200 A mm 1900 B mm 900 C mm 2200

Shaved Pipe Saw

Technical Datas		MTT 160	MTT 250
Cutting Pipe Diameter	mm	O 50-160	O 50-250
Maximum Wall Thickness	mm	15	20
Speed of Pull	m/min.	10	10
Engine Power	kW	2.2	3
Engine Revolution	rev./min.	1500	1420
Rotation Speed of Saw	Rev./min.	338	286
Cutting Speed	m/min.	36-225	36-225
Required Pressure Air	Nm3/strock	0.03	0.03
Working Axis	mm	1020	1020

Measurements MTT 160 MTT 250 A mm 2100 2500 B mm 900 1100 C mm 1500 1600

Plastic Pipe Heads

PVC Pipe Heads MK1 - O20 - O40 MK2 - O20 - O63 MK3 - O50 - O160 MK4 - O75 - O250 PE Pipe Heads MPEK1 - O16 - O50 PP Pipe Heads MPPK1 - O16 - O75

For our other Models Plastic Profile Production Lines click here

For further information please contact us.

Contact us :  FETHIL INDUSTRIAL MACHINES MANUFACTURING AND FOREIGN TRADE CO.
Nöbethane Cad. Nöbethane Cik. No:3  Sirkeci   Istanbul  TR-34420  TURKEY
Tel: +90-212-5120921, 5120928  Fax : +90-212-5120960    www.fethil.com

  Top of page         Home Page              Mail to Fethil 

  Plastic Machines       Metal Machines      Textile Machines       Foodstuff Machines       Packaging Machines 
  Paper Processing Machines       Industrial Spare Parts       Other Machines & Heavy Industry 

Attention please : When replying, please indicate which machine's details you require, plus your name, your company's name, address & phone/fax/e-mail numbers,so that we can contact you with the required information. The messages which includes only name and e-mail address will not reply.
Sorry for delaying sometimes because of we receive too much messages every day and needs time for replying them reliable.