fethil-logo-beyaz.jpg (2769 bytes)

FETHIL INDUSTRIAL MACHINES

Hydraulic Gear Pumps

gear01.jpg (9484 bytes)gear02.jpg (8970 bytes)gear03.jpg (10195 bytes)

gear04.jpg (9246 bytes)gear05.jpg (9807 bytes)

  • Simple and robust construction
  • New principle of sealing the pump body
  • Independent double side bearings
  • New generation composite bushings

Hydraulic gear pumps are self aspirating external pumps. They are sued to generate a flow of fluid and to impart the necessary forces to this flow.

Fluid                                   : Mineral oil to RE 07 075
Fluid temperature range  : -15ºC to +80ºC
Viscosity range                 : 10 to 300 mm²/s (recommended) 1000 mm²/s (permissible at start)
Degree of contamination : Permissible to NAS 1638 class 10. Filters with a retention rate of at least ß20 >= 100
                                           are recommended. Longer service may be achieved by filters type ß20 >= 100 to NAS
                                           1638 class 9.
Drive                                  : Flexible couplings are recommended, proposals of any other types, inquirements    
                                           requested.
Installation                         : Optional to the purpose.
Direction of rotation        : Subjected to be driven in the given direction of rotation.
Weights                             : See table for the individual pump types.

Size

 4 6 7 8 9 11 14 16 17 20 24 28 34
Displacement (volumetric) cm3/rev. 4.4 6.3 7.0 8.2 9.5 11.3 14.0 15.8 17.8 20.8 23.9 27.9 34.4
L/min. 6.6 9.5 10.5 12.3 14.3 17.0 21.0 23.7 26.7 31.2 35.9 41.9 51.6
Max.continuos pressure p1  bar 210 210 210 210 210 210 210 210 210 200 150 150 120
Max. speed at p1 rpm 4.000 4.000 4.000 4.000 3.000 2.700 4.000 3.800 3.400 2.900 2.600 2.200 1.800
Min. speed at p=180 bar rpm 1.000 1.000 1.000 800 600 600 600 600 600 600 600 700 700
Min. speed at p1 rpm 1.300 1.300 1.300 1.300 1.200 1.200 800 800 800 800 800 800 800

Operating inlet pressure (absolute) ?abs min = 0,7 bar, ?abs max = 3,0 bar @ v = 41 mm²/s & t = 50ºC

 

Pump Outputs & Power Requirements (Average Values)

Size Type Nominal Volume cm³/rev Pressure p  bar 10 25 50 75 100 125 150 175 200 220
4 1D1-113... 4,4 Q eft  L/min 6.4 6.3 6.3 6.3 6.2 6.2 6.1 6.0 6.0 6.0
P a     kW 0.4 0.6 0.8 1.1 1.5 1.8 2.2 2.5 2.8 3.1
T        Nm 2.6 4.1 5.7 7.4 9.5 11.4 13.4 15.3 17.2 18.9
6 1D1-120... 6,3 Q eft  L/min 9.1 9.0 9.0 9.0 8.9 8.9 8.8 8.7 8.6 8.5
P a     kW 0.4 0.7 1.1 1.6 2.1 2.5 2.8 3.3 3.7 4.0
T        Nm 2.6 4.3 7.2 10.1 13.0 15.9 18.8 21.7 24.8 27.0
7 1D1-124... 7 Q eft  L/min 10.0 10.0 9.9 9.9 9.8 9.8 9.7 9.6 9.6 9.5
P a     kW 0.4 0.7 1.2 1.8 2.3 2.7 3.1 3.6 4.1 4.4
T        Nm 2.9 4.9 8.1 11.3 14.5 17.8 21.0 24.2 27.6 30.2
8 1D1-128... 8,2 Q eft  L/min 12.0 11.9 11.8 11.7 11.6 11.5 11.4 11.3 11.3 11.2
P a      kW 0.4 0.9 1.4 2.0 2.5 3.1 3.5 4.0 3.6 5.0
T        Nm 2.8 5.9 9.7 13.8 17.4 21.2 24.9 29.2 33.3 36.6
9 1D1-130... 9,5 Q eft  L/min 13.8 13.8 13.7 13.6 13.4 13.3 13.2 13.1 13.0 13.0
P a      kW 0.4 0.9 1.4 2.1 2.7 3.3 3.9 4.4 5.1 5.6
T        Nm 3.3 6.9 11.4 16.0 20.3 24.7 29.0 33.9 38.8 42.6
11 1D1-136... 11,3 Q eft  L/min 16.8 16.4 16.2 16.1 16.0 15.9 15.8 15.6 15.5 15.4
P a      kW 0.5 1.0 1.7 2.5 3.2 3.9 4.7 5.3 6.0 6.5
T        Nm 4.3 9.0 14.7 20.6 25.9 31.6 37.0 43.3 49.7 54.5
14 1D1-144... 14 Q eft  L/min 20.6 20.4 20.2 20.1 19.9 19.7 19.6 19.3 19.2 19.1
P a      kW 0.7 1.3 2.1 3.0 3.9 4.9 5.7 6.5 7.3 8.2
T        Nm 5.0 10.1 15.2 21.0 29.6 36.4 42.3 49.2 55.4 60.0
16 1D1-152... 15,8 Q eft  L/min 23.2 23.0 22.8 22.7 22.4 22.2 22.0 21.9 21.7 21.6
P a      kW 0.7 1.4 2.4 3.7 4.6 5.5 6.5 7.4 8.5 9.2
T        Nm 5.2 10.4 15.9 23.5 30.5 37.3 43.8 50.8 57.6 62.4
17 1D1-160... 17,8 Q eft  L/min 26.1 26.0 25.8 25.6 25.3 25.1 24.9 24.8 24.7 24.7
P a      kW 0.8 1.7 2.7 3.8 5.1 6.2 7.4 8.5 9.5 10.6
T        Nm 5.8 11.8 18.0 26.5 34.4 42.1 49.3 57.3 65.0 71.5
20 1D1-162... 20,8 Q eft  L/min 30.6 30.4 30.0 29.6 29.3 29.5 29.2 29.0 28.7 -
P a      kW 1.0 2.0 3.1 4.4 5.8 7.2 8.6 9.8 11.0 -
T        Nm 6.8 13.8 21.0 30.8 40.2 49.2 57.6 66.9 75.0 -
24 1D1-172... 23,9 Q eft  L/min 35.1 34.7 34.2 34.1 33.9 33.7 33.5 - - -
P a      kW 1.1 2.4 3.3 5.0 6.6 8.1 9.7 - - -
T        Nm 7.9 15.8 24.2 35.5 46.2 58.5 66.2 - - -
28 1D1-190... 27,9 Q eft  L/min 41.4 41.0 40.6 40.3 40.2 40.0 39.8 - - -
P a      kW 1.3 2.7 3.9 5.9 7.8 9.6 - - - -
T        Nm 7.8 15.8 24.1 35.6 46.2 56.5 - - - -
34 1D1-200... 34,4 Q eft  L/min 50.6 50.4 50.3 49.9 49.6 49.3 - - - -
P a      kW 1.7 3.4 4.9 7.2 9.6 11.8 - - - -
T          Nm 9.6 19.6 29.8 44.0 57.1 69.7 - - - -

Effective output flow (Q eff); required drive power (P a) and Torque (T) at n = 1450 rpm, v = 41 mm²/s & t = 50ºC

For further information please contact us.

 

Contact us :  FETHIL INDUSTRIAL MACHINES MANUFACTURING AND FOREIGN TRADE CO.
Nöbethane Cad. Nöbethane Cik. No:3  Sirkeci   Istanbul  TR-34420  TURKEY
Tel: +90-212-5120921, 5120928  Fax : +90-212-5120960    www.fethil.com

  Top of page         Home Page          mail05.gif (1069 bytes)    Mail to Fethil 

  Plastic Machines       Metal Machines      Textile Machines       Foodstuff Machines       Packaging Machines 
  Paper Processing Machines       Industrial Spare Parts       Other Machines & Heavy Industry 

Attention please : When replying, please indicate which machine's details you require, plus your name, your company's name, address & phone/fax/e-mail numbers,so that we can contact you with the required information. The messages which includes only name and e-mail address will not reply.
Sorry for delaying sometimes because of we receive too much messages every day and needs time for replying them reliable.