FETHIL INDUSTRIAL MACHINES

BUTTERFLY VALVE DCB-16

Wafer type, PN 16, DN 40...600

• Perfect shut off liquid and gas in both directions
• Economic alternatives to gate, ball and plug valves
• Corrosion free-stems and body are not in contact with line media. Bodies are protected with epoxy coating.
• No flange gaskets for installation.
• Self centering disc by axial movement due to floating coupling.
• Compact light weight wafer design (flanges lug and u section)
• Anti blow out system. The upper stem is fully retained by unlikely event of primary seal fail.
• Easy replacement seat without any special tools.
• Easy uninstallation for each type of actuators; manual, pneumatic, hydraulic and electric.
• Wide range of material for various conditions.
• Maintenance free.
• Working temperature -35oC +150oC

GLOBE VALVE DGV-16

PN 16, DIN 3202 F1, DN 15...300

• Besides high pressure and temperature resistant pure graphite packing special packing for hot oil and other media are used
• Each valve, at of position is tested at its nominal pressure. No leakage is permitted in this test.
• Disc surfaces are made of stainless steel. They are r-the delicate operations. By fitting of disc surfaces, valves are supplied no-leakage.
• Grey cast establishing body, bonnet, gland and handwhell are produced in quality of GG25. Strength conditions of globe valve apply DIN 2401. (pressure-temperature relation)

CHECK VALVE DCV-16

Spring Loaded, PN 16, TS 10873, DIN 3202, DN 15...300

• Check return valves are indispensable armatures for all installations when the flow of steam, liquid, gas etc. is stopped an opposite direction flow is undesired.
• The disc and disc surfaces are made of stainless steel. They are applied the delicate operations. By fitting the disc surfaces, valves are supplied no-leakage.
• Grey cast establishing body and bonnet are produced in quality of GG25.
• Strength conditions of check valve apply to DIN 2401. (pressure-temperature relation)

CONTROLLED CHECK VALVE DKC-16

Spring Loaded, PN 16, DIN 3202 F1, DN 15...300

• Besides high pressure and temperature resistant pure graphite and packing-special packing for hot oil and other media are used.
• Each valve, at of position is tested at its nominal pressure. No leakage is permitted in this test.
• Disc surfaces are made of stainless steel. They are applied the delicate operations. By fitting of disc surfaces, valves are supplied no-leakage.
• Grey cast establishing body, bonnet, gland are produced in quality of GG25.
• Strength conditions of controlled check valve apply to DIN 2401. (pressure-temperature relation)

STRAINER VALVE  DPT-16

Stainless steel mesh, PN 16, TS 11494, DN 15...400

• Strainers manufactured by our company have stainless steel filters.
• Filters used in strainers NW65 mm, dimensions and up are designed to minimize the loss of pressure. Its material is stainless steel.
• Grey cast establishing body and bonnet are produced in quality of GG25.
• Strength conditions of strainers apply to DIN 2401 (pressure and temperature relation).
• Cleaning the filter is available by plug on the bonnet without opening the bonnet.

STRAINER VALVE  DPT-06

Stainless steel mesh, PN 6, TS 11494, DN 15...400

• Strainers manufactured by our company have stainless steel filters.
• Filters used in strainers NW65 mm, dimensions and up are designed to minimize the loss of pressure. Its material is stainless steel.
• Grey cast establishing body and bonnet are produced in quality of GG25.
• Strength conditions of strainers apply to DIN 2401 (pressure and temperature relation).
• Cleaning the filter is available by plug on the bonnet without opening the bonnet.

BALL VALVE FULL BORE DKD-16

Full bore, PN 16,   TS 3148/F17,  DIN 2533 F1,
DN 15...125

• Grey cast establishing body is quality of GG25.
• Stainless steel ball and stem.

BALL VALVE REDUCED BORE DKR-16

Reduced Bore, PN 16, TS 3148/F19,  DIN 2533,
DN 20/15...150/125

• Grey cast establishing body is quality of GG25.
• Stainless steel ball and stem.

BALL VALVE FOR WATER DKS-10

Full Bore, PN 10, PN 6, TS 3148/F17,  DIN 3202 F4,
DN 40...150

• Grey cast establishing body is quality of GG25.
• Stainless steel ball and stem.

SWING CHECK VALVE DCS-16

Reduced disc packing, PN 16/10, TSEK,  DIN 3232,
DN 40...300

• The swing check valve is produced according to DIN 3232 and DIN 3202.
• Grey cast establishing body, bonnet and disc are produced in quality of GG25.
• Rubber disc packing.